GAS Divorced Cooling system reservoir 3.0T EA837｜ Other Products

Currently back ordered!!!! ETA early july!!!
 

As of 2024, all of our kits will now include an upper bleeder port for direct connection to compatible heat exchangers! This small change means that you can continue to enjoy the benefits of a self-bleeding HX. If your HX is not self-bleeding, this port can be left capped.
This kit does not include a self-bleeder setup. This will need to be set up separately if you choose to run one.
 
Audi’s supercharged V6 is a powerhouse when tuned properly, but the cooling system remains a restriction to how much power can be made before the heat takes over. Even with the addition of heat exchangers and additional reservoirs, the cooling system for the supercharger system relies on hot engine coolant as its source. 
Our upper coolant reservoir was introduced in 2017 to divorce your vehicle's cooling systems, providing your supercharger with its own dedicated coolant circuit. Now its newest revision is in full production and available for installation into your supercharged 3.0T! 
 
Features:

Simple installation (under 1 hour)
Reduces pressure on your intercooler bricks, extending their life exponentially
Reduces initial and sustained supercharger system temperature, resulting in lower air intake temperatures
Can be installed on a completely stock or fully upgraded cooling system
No cutting or drilling required, no self-drilling/self-tapping hardware
All installation hardware & stainless clamps included
Eliminates heat transfer from the engine’s cooling system 
Best bang for buck cooling upgrade for the 3.0T, and an aesthetic improvement to any engine bay! 

 
Includes:

Divorced Cooling System Reservoir
Reinforced silicone coolant hose
Stainless steel hose clamps
All mounting hardware
This is a complete kit that includes everything you need to divorce your supercharger loop. No additional parts or hardware are required!

 
Fitment:

2009-2016 Audi B8 A4/S4 3.0T Supercharged
2009-2017 Audi B8 A5/S5 3.0T Supercharged
2009-2017 Audi 8R Q5/SQ5 3.0T Supercharged
2012-2018 Audi C7 A6/A7 3.0T Supercharged

Note: Due to headlight differences, if you have a pre-facelift B8 S5 3.0T, you will require a B8.5 kit. If you have any questions about which reservoir kit you will need, email info@garageautosports.com and we will be happy to help!
Brand:GASChassis:B8 (2009-2012), B8.5 (2013-2016), C7/C7.5 A6/A7, 8R Q5/SQ5