Featured Option｜ Other Products ｜RepCon 928 FS Very Rapid-Setting Concrete Repair Mortar (Pack of 6)

RepCon 928 FS is a very rapid-setting, polymer-modified concrete repair mortar for the fastest possible return to traffic
RepCon 928 FS is a fiber-reinforced repair mortar with a corrosion inhibitor, built for concrete floors, highway pavements, and bridge decks where quick traffic resumption is critical. It meets ASTM C928 and AASHTO T260 standards and is self-curing under most conditions.
Key Features & Benefits

One-component, dry-polymer modified — just add water
Very rapid setting for fast traffic resumption
Fiber-reinforced with an integral corrosion inhibitor
Suitable for horizontal and vertical form & pour applications
Self-curing under most conditions

Application Instructions

Ensure the concrete is sound and free of oil, grease, dust, laitance, or contaminants
Saw cut the perimeter of the repair area 1/8" deeper than the repair depth for a notched edge
Mechanically abrade to a minimum CSP of 5 per ICRI 310.2, keeping the surface SSD with no standing water
Remove rust from exposed steel reinforcement and coat with SpecPrep SB, applying the repair mortar wet-on-wet or within the recommended open time
Mix 4.75-5.0 pints of clean water per 50 lb bag (up to 5.25 pints for non-DOT, higher-flow applications) with a low-speed drill or mortar mixer for 2-3 minutes
Apply from 1" to 2" without extension; for deeper DOT or heavy-traffic repairs, extend with clean, SSD 3/8" aggregate up to 60% by weight (over 1") or 100% by weight (over 4")

Packaging
Available in 50 lb bags (pack of 6).
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:RCON928FS-BAGTags:Cementitious Products and Liquids